Table of Contents
Advertisement
3. Click OK.
Simultaneous Login
The administrator can set the maximum number of users logging into the system through web
browser simultaneously.
Go to Configuration → System → User Management → Online Users , click General, and set
Simultaneous Login.
Online Users
The information of users logging into the device is shown.
Go to Configuration → System → User Management → Online Users to view the list of online
users.
10.13 Power Consumption Mode
It is used to switch the power consumption when the device is working.
Note
The function is only supported by certain camera models.
Go to Configuration → Proactive Mode → Power Consumption Mode , select the desired power
consumption mode.
Performance Mode
The device works with all the functions enabled.
Standby Mode
The device only support certain functions and does not support setting functions.
Proactive Mode
The device DSP works normally. It records the videos with the main stream at the half frame
rate, and supports the remote login, preview and the configuration.
Low Power Sleep
When the device power is lower than Threshold of Low Power Sleep Mode, the device enters
sleep mode.
When the device power is recovered to 10% above the threshold, the device enters the user
configuration mode.
Scheduled Sleep
Network Speed Dome User Manual
94
Advertisement
Table of Contents
