Capture Automatically; Capture Manually - HIKVISION DS-2DE5425IWG-4G User Manual

6.3.1 Capture Automatically

This function can capture pictures automatically during configured time periods.
Before You Start
If event-triggered capture is required, you should configure related linkage methods in event
settings. Refer to Event and Alarm for event settings.
Steps
1. Go to Configuration → Storage → Schedule Settings → Capture .
2. Set capture schedule. Refer to Set Arming Schedule for configuring schedule time.
3. Set the capture type.
Scheduled
Capture a picture at the configured time interval.
Event-Triggered
Capture a picture when an event is triggered.
4. Set the Format, Resolution, Quality, Interval, and Capture Number.
Note
The resolution of the captured picture is the same as the resolution of the captured picture
stream. You can select Stream Type in Advanced.
5. Click Save.

6.3.2 Capture Manually

Steps
1. Go to Configuration → Local .
2. Set the Image Format and saving path to for snapshots.
JPEG
The picture size of this format is comparatively small, which is better for network
transmission.
BMP
Network Speed Dome User Manual
Figure 6-1 Set Capture Schedule
43