Table of Contents
Advertisement
Note
This function is only available for certain device models under certain settings. Please refer to
the actual settings.
4. Click
. Click and drag the mouse on the live image, and then right click the mouse to finish
drawing one area.
5. Optional: Click
6. Optional: You can set the parameters of multiple areas by repeating the above steps.
Expert Mode
You can configure different motion detection parameters for day and night according to the actual
needs.
Steps
1. Select Expert Mode in Configuration.
2. Set parameters of expert mode.
Scheduled Image Settings
OFF
Image switch is disabled.
Auto-Switch
The system switches day/night mode automatically according to environment. It displays
colored image at day and black and white image at night.
Scheduled-Switch
The system switches day/night mode according to the schedule. It switches to day mode
during the set periods and switches to night mode during the other periods.
Sensitivity
The higher the value of sensitivity is, the more sensitive the motion detection is. If scheduled
image settings is enabled, the sensitivity of day and night can be set separately.
3. Select an Area and click
mouse to finish drawing one area.
Network Speed Dome User Manual
to clear all the areas.
. Click and drag the mouse on the live image and then release the
46
Advertisement
Table of Contents
