Table of Contents
Advertisement
6. Click Save.
Set Encrypted Memory Card
Before You Start
Insert an encrypted memory card to the device. For detailed installation, refer to Quick Start
●
Guide of the device.
You need to know the correct encryption password of the memory card.
●
Steps
1. Go to Configuration → Storage → Storage Management → HDD Management .
2. Select the memory card.
Note
If an Unlock button appears, you need to unlock the memory card first. See Detect Memory
Card Status for details.
3. Verify the encryption password.
1) Click Parity.
2) Enter the encryption password.
3) Click OK.
When the Encryption Status turns to Encrypted, the memory card is ready for use.
Note
If the encryption password is forgotten and you still want to use this memory card, see Set New
or Unencrypted Memory Card to format and set the memory card. All existing contents will be
removed.
4. Optional: Define the Quota of the memory card. Input the percentage for storing different
contents according to your needs.
5. Click Save.
Detect Memory Card Status
The device detects the status of Hikvision memory card. You receive notifications when your
memory card is detected abnormal.
Before You Start
The configuration page only appears when a Hikvision memory card is installed to the device.
Steps
1. Go to Configuration → Storage → Storage Management → Memory Card Detection .
2. Click Status Detection to check the Remaining Lifespan and Health Status of your memory card.
Remaining Lifespan
Network Speed Dome User Manual
36
Advertisement
Table of Contents
