Set Otap; Set Sdk Service; Set Wireless Dial - HIKVISION DS-2DE5425IWG-4G User Manual

9.17 Set OTAP

The device can be accessed to the maintenance platform via OTAP protocol, in order to search and
acquire device information, upload device status and alarm information, reboot and update the
device.
Steps
1. Go to Configuration → Network → Platform Access → OTAP to enable the function.
2. Set related parameters.
3. Click Test to check if the device connects to server.
4. Click Save.
Register Status turns to Online when the function is correctly set.

9.18 Set SDK Service

If you want to add the device to the client software, you should enable SDK Service or Enhanced
SDK Service.
Steps
1. Go to Configuration → Network → Platform Access → SDK Service .
2. Set SDK Service parameters.
1) Check Enable to add the device to the client software with SDK protocol.
2) Enter the Port number.
3. Set Enhanced SDK Service parameters.
1) Check Enable to add the device to the client software with SDK over TLS protocol.
2) Optional: Click TLS Settings to enable the TLS version that the device supports. Refer to TLS
for details.
3) Enter the Port number.
4) Select a server certificate to make sure the data transmission security. You can click Certificate
Management to add a certificate. Refer to Certificate Management for details.
4. Click Save.

9.19 Set Wireless Dial

The built-in wireless module offers dial-up access to the Internet for the device.
Before You Start
Get a SIM card, and activate 3G/4G services. Insert the SIM card to the corresponding slot.
Steps
1. Go to Configuration → Network → Advanced Settings → Wireless Dial .
2. Check to enable the function.
3. Click Dial Parameters to configure and save the parameters.
Network Speed Dome User Manual
78