Table of Contents
Advertisement
2. Click Import in the CA Certificate list.
3. Input Certificate ID.
Note
The input certificate ID cannot be the same as the existing ones.
4. Click
to select the certificate file.
5. Click Save.
The imported certificate is displayed in the CA Certificate list.
If the certificate is used by certain functions, the function name is shown in the Functions
column.
Enable Certificate Expiration Alarm
Steps
1. Check Enable Certificate Expiration Alarm. If enabled, you will receive an email or the camera
links to the surveillance center that the certificate will expire soon, or is expired or abnormal.
2. Set the Remind Me Before Expiration (day), Alarm Frequency (day) and Detection Time (hour).
Note
If you set the reminding day before expiration to 1, then the camera will remind you the day
●
before the expiration day. 1 to 30 days are available. Seven days is the default reminding days.
If you set the reminding day before expiration to 1, and the detection time to 10:00, and the
●
certificate will expire in 9:00 the next day, the camera will remind you in 10:00 the first day.
3. Click Save.
10.12.7 TLS
The Transport Layer Security (TLS) protocol aims primarily to provide privacy and data integrity
between two or more communicating computer applications. TLS settings are effective for HTTP(S)
and enhanced SDK service.
Go to Maintenance and Security → Security → TLS , and enable the desired TLS protocol. Click
Save.
Caution
Use the function with caution. The security risk of device internal information leakage exists when
the function is enabled.
Network Speed Dome User Manual
92
Advertisement
Table of Contents
