Table of Contents
Advertisement
Go to Maintenance and Security → Maintenance → Device Debugging → Diagnose Information .
Click Export. In the pop-up window, check desired diagnose information and click Export to export
corresponding diagnose information of the device.
10.8 View Open Source Software License
On the top-right corner, click
license. You can view the license in the editor.
10.9 Set Live View Connection
It controls the remote live view connection amount.
Live view connection controls the maximum live view that can be streamed at the same time.
Enter Configuration → System → System Settings → System Service to set the upper limit of the
remote connection number.
10.10 Time and Date
You can configure time and date of the device by configuring time zone, time synchronization and
Daylight Saving Time (DST).
10.10.1 Synchronize Time Manually
Steps
1. Go to Configuration → System → System Settings → Time Settings .
2. Select Time Zone.
3. Select Manual Time Sync..
4. Choose one time synchronization method.
- Select Set Time, and manually input or select date and time from the pop-up calendar.
- Click Sync. with computer time to synchronize the time of the device with that of the local PC.
5. Click Save.
10.10.2 Set NTP Server
You can use NTP server when accurate and reliable time source is required.
Before You Start
Set up a NTP server or obtain NTP server information.
Steps
1. Go to Configuration → System → System Settings → Time Settings .
Network Speed Dome User Manual
and select Open Source Software Description to download the
85
Advertisement
Table of Contents
