Table of Contents
Advertisement
7. Click Save.
8. Optional: Click Add, and repeat above steps to set other rules.
Note
Up to 4 rules can be set.
9. Set arming schedule. See Set Arming Schedule .
10. Set linkage method. See Linkage Method Settings .
7.2.6 Set Region Exiting Detection
Region exiting detection is used to detect the objects movement of exiting from a predefined area.
When it occurs, the device takes linkage actions as response.
Before You Start
Go to VCA → Select Application to select Smart Event, and click Next to enable the function.
Steps
1. Go to VCA → Set Application → Smart Event → Region Exiting Detection .
2. Check Enable.
3. Optional: Click Lock to lock PTZ control to prevent the interruption from other PTZ related action
during configuration.
Normally, the PTZ control is automatically locked when you enter the configuration interface.
You can manually resume the lock when the countdown is over.
4. Adjust the live image to the desired scene by using PTZ control buttons.
Network Speed Dome User Manual
Figure 7-5 Draw Area
56
Advertisement
Table of Contents
