4.1.5 Count Pixel
It helps to get the height and width pixel of the selected region in the live view image.
Steps
1. Click
to enable the function.
2. Drag the mouse on the image to select a desired rectangle area.
The width pixel and height pixel are displayed on the bottom of the live view image.
4.1.6 Start Digital Zoom
It helps to see a detailed information of any region in the image.
Steps
1. Click
to enable the digital zoom.
2. In live view image, drag the mouse to select the desired region.
3. Click in the live view image to back to the original image.
4.1.7 Conduct Regional Focus
You can enable the function to focus on certain area.
Steps
Note
This function varies with the device model.
1. Click
to enable regional focus.
2. Drag the mouse on the live view to draw a rectangle as the desired focus area.
3. Click
to disable this function.
4.1.8 Conduct Regional Exposure
When the brightness of live view is not balanced, you can enable this function to optimize the
exposure of the selected image region.
Steps
1. Click
to enable regional exposure.
2. Drag the mouse on the live view to draw a rectangle as the desired exposure area.
3. Click
to disable this function.
Network Speed Dome User Manual
17