Set Unattended Baggage Detection - HIKVISION DS-2XC6285G0-L User Manual

5. Optional: You can set the parameters of multiple areas by repeating the above steps.
6. For the arming schedule settings, refer to Set Arming Schedule . For the linkage method settings,
refer to Linkage Method Settings .
7. Click Save.

10.3.5 Set Unattended Baggage Detection

It is used to detect the objects left over in the predefined region. Linkage methods can be triggered
after the object is left and stays in the region for a set time period.
Before You Start
Go to VCA and select the application. Select Smart Event and click Next to enable the function.
●
For the device supporting HEOP, go to VCA to import and enable Smart Event.
●
Steps
1. Go to VCA → Set Application → Smart Event → Unattended Baggage Detection .
2. Check Enable.
3. Click Add to add a rule and set a detection area.
1) Draw a detection area. Click
boundaries of the detection area, and right click to complete drawing.
2) Set the minimum size and the maximum size for the target to improve detection accuracy.
Only targets whose size are between the maximum size and the minimum size trigger the
detection. Click
maximum target size.
Network Camera User Manual
Figure 10-4 Set Rule
, click on the live view to specify the vertexes and draw the
and , then drag the mouse in the live view to draw the minimum and
82