Table of Contents
Advertisement
3. Set Multicast parameters.
Stream Type
The stream type as the multicast source.
Video Port
The video port of the selected stream.
Audio Port
The audio port of the selected stream.
4. Set RTSP Authentication.
Authentication
Digest and digest/basic are supported, which means authentication information is needed
when RTSP request is sent to the device. If you select digest/basic, it means the device
supports digest or basic authentication. If you select digest, the device only supports digest
authentication.
Digest Algorithm
MD5, SHA256 and MD5/SHA256 encrypted algorithm in RTSP authentication. If you enable
the digest algorithm except for MD5, the third-party platform might not be able to log in to
the device or enable live view because of compatibility. The encrypted algorithm with high
strength is recommended.
5. Click Save.
9.10 Set SRTP
The Secure Real-time Transport Protocol (SRTP) is a Real-time Transport Protocol (RTP) internet
protocol, intended to provide encryption, message authentication and integrity, and replay attack
protection to the RTP data in both unicast and multicast applications.
Steps
1. Go to Configuration → Network → Advanced Settings → SRTP .
2. Select Server Certificate.
3. Select Encrypted Algorithm.
4. Click Save.
Note
Only certain device models support this function.
●
If the function is abnormal, check if the selected certificate is abnormal in certificate
●
management.
Network Speed Dome User Manual
75
Advertisement
Table of Contents
