Table of Contents
Advertisement
9.8 HTTP(S)
HTTP is an application-layer protocol for transmitting hypermedia documents. HTTPS is a network
protocol that enables encrypted transmission and identity authentication, which improves the
security of remote access.
Steps
1. Go to Configuration → Network → Network Service → HTTP(S) .
2. Enter HTTP Port.
Note
It refers to the port through which the browser accesses the device. For example, when the
HTTP Port is modified to 81, you need to enter http://192.168.1.64:81 in the browser for login.
3. Check Enable in HTTPS.
Note
You can click TLS Settings to set the TLS version that the device supports. Refer to for details.
4. Enter HTTPS Port.
5. Optional: Check HTTPS Browsing to access the device only via HTTPS protocol.
6. Select Server Certificate.
7. Set Web Authentication.
Authentication
Digest and digest/basic are supported, which means authentication information is needed
when WEB request is sent to the device. If you select digest/basic, it means the device
supports digest or basic authentication. If you select digest, the device only supports digest
authentication.
Digest Algorithm
MD5, SHA256 and MD5/SHA256 encrypted algorithm in WEB authentication. If you enable
the digest algorithm except for MD5, the third-party platform might not be able to log in to
the device or enable live view because of compatibility. The encrypted algorithm with high
strength is recommended.
8. Click Save.
9.9 RTSP
RTSP (Real Time Streaming Protocol) is an application-layer controlling protocol for streaming
media.
Steps
1. Go to Configuration → Network → Network Service → RTSP .
2. Enter Port.
Network Speed Dome User Manual
74
Advertisement
Table of Contents
