Table of Contents
Advertisement
10.12.3 Security Audit Log
The security audit logs refer to the security operation logs. You can search and analyze the security
log files of the device so as to find out the illegal intrusion and troubleshoot the security events.
Security audit logs can be saved on device internal storage. The log will be saved every half hour
after device booting. Due to limited storage space, you can also save the logs on a log server.
Search Security Audit Logs
You can search and analyze the security log files of the device so as to find out the illegal intrusion
and troubleshoot the security events.
Steps
Note
This function is only supported by certain camera models.
1. Go to Maintenance and Security → Maintenance → Security Audit Log .
2. Select log types, Start Time, and End Time.
3. Click Search.
The log files that match the search conditions will be displayed on the Log List.
4. Optional: Click Export to save the log files to your computer.
Set Log Server
The log server should support syslog (RFC 3164) over TLS.
Before You Start
Install client and CA certificates before configuration. Refer to Certificate Management for
●
detailed information.
Select certificates according to the requirement of the log server. If two-way authentication is
●
required, select the CA certificate and the client certificate. If one-way authentication is
required, select the CA certificate only.
Steps
1. Click Advanced Configuration.
2. Check Enable Log Upload Server.
3. Optional: Check Enable Encrypted Transmission if you want the log data to be encrypted.
4. Input Log Server IP and Log Server Port.
5. Optional: Click Test to test the settings.
6. Optional: Select a client certificate.
7. Select a CA certificate to the device.
Network Speed Dome User Manual
88
Advertisement
Table of Contents
