Network Speed Dome User Manual
Defog
You can enable the defog function when the environment is foggy and the image is misty. It
enhances the subtle details so that the image appears clearer.
Figure 5-5 Defog
EIS
Increase the stability of video image by using jitter compensation technology.
5.6.2 Image Parameters Switch
The device automatically switches image parameters in set time periods.
Go to image parameters switch setting page: Configuration → Image → Display Settings → Image
Parameters Switch , and set parameters as needed.
Set Switch
Switch the image parameters to the scene automatically in certain time periods.
Steps
1. Check Enable.
2. Select and configure the corresponding time period and the scene.
Note
For the scene configuration, refer to Scene Mode .
3. Click Save.
Set Link to Preset
You can set a preset to switch the image to a linked scene.
32