Table of Contents
Advertisement
6. Optional: Set the minimum size and the maximum size for the target to improve detection
accuracy. Only targets whose size are between the maximum size and the minimum size trigger
the detection.
1) Click Max. Size, and drag the mouse on live image. If you want to change the size, click the
button and draw again.
2) Click Min. Size, and drag the mouse on the live image. If you want to change the size, click the
button and draw again.
7. Set detection parameters.
Sensitivity
Detection
Target
8. Click Save.
9. Optional: Click Add, and repeat above steps to set other rules.
Note
Up to 4 rules can be set.
10. Set arming schedule. See Set Arming Schedule .
11. Set linkage method. See Linkage Method Settings .
Network Speed Dome User Manual
Figure 7-4 Draw Line
It stands for the sensitivity of detecting an target. The higher the value is,
the more easily the target is detected.
You can specify the object type, and the device only detects the selected
type of objects.
54
Advertisement
Table of Contents
