Set Region Exiting Detection - HIKVISION DS-2XS6A87G1-LS/4G User Manual

Detection Target
Human and vehicle are available. If the detection target is not selected, all the detected
targets will be reported, including the human and vehicle.
Target Validity
If you set a higher validity, the required target features should be more obvious, and the
alarm accuracy would be higher. The target with less obvious features would be missing.
6. Optional: You can set the parameters of multiple areas by repeating the above steps.
7. For the arming schedule settings, refer to Set Arming Schedule . For the linkage method settings,
refer to Linkage Method Settings .
8. Click Save.

6.2.6 Set Region Exiting Detection

It is used to detect objects exiting from a predefined virtual region. If it occurs, the device can take
linkage actions.
Before You Start
For certain device models, you need to enable the smart event function on VCA Resource page
●
first.
For the device supporting HEOP, go to VCA → APP to import and enable Smart Event.
●
Steps
1. Go to VCA → Smart Event → Region Exiting Detection . For certain device models, you should
go to Configuration → Event → Smart Event → Region Exiting Detection .
Network Camera User Manual
Figure 6-5 Set Rule
44