Image Parameters Switch - HIKVISION DS-2SF8C442MXG-EL/26 User Manual

TandemVu PTZ Camera User Manual
Figure 6-4 Defog
EIS
Increase the stability of video image by using jitter compensation technology.

6.6.2 Image Parameters Switch

The device automatically switches image parameters in set time periods.
Go to image parameters switch setting page: Configuration → Image → Image Parameters Switch ,
and set parameters as needed.
Set Scheduled-switch
Switch the image to the linked scene mode automatically in certain time periods.
Steps
1. Check Scheduled-switch.
2. Select and configure the corresponding time period and linked scene mode.
Note
For Linked Scene configuration, refer to Scene Mode .
3. Click Save.
Set Link to Preset
You can set a preset to switch the image to a linked scene.
Steps
1. Check Link to Preset.
2. Select a preset.
3. Check and set a time period and a linked scene mode.
4. Click Save.
74