Image Parameters Switch - HIKVISION DS-2XC6285G0-L User Manual

Gray Scale
You can choose the range of the Gray Scale as [0-255] or [16-235].
Mirror
When the live view image is the reverse of the actual scene, this function helps to display the
image normally.
Select the mirror mode as needed.
Note
The video recording will be shortly interrupted when the function is enabled.
Rotate
When this function is enabled, the live view will rotate 90° counterclockwise. For example, 1280 ×
720 is rotated to 720 × 1280.
Enabling this function can change the effective range of monitoring in the vertical direction.
Note
This function is supported under certain settings.
Lens Distortion Correction
For device equipped with motorized lens, image may appear distorted to some extent. Enable this
function to correct the distortion.
Note
This function is only supported by certain device equipped with motorized lens.
●
The edge of image will be lost if this function is enabled.
●

4.7.2 Image Parameters Switch

The device automatically switches image parameters in set time periods.
Go to image parameters switch setting page: Configuration → Image → Display Settings → Image
Parameters Switch , and set parameters as needed.
Network Camera User Manual
23