Modes Of Operation; Operation Mode; Menu Mode - Honeywell BW RigRat User Manual

CHAPTER
11
The BW RigRat has three modes, Operation Mode, Menu Mode, and Diagnostic Mode.

Operation Mode

Menus in Operation Mode are easy to step through by pressing the button.
Note: There is only one button.
Note: There are two types of button presses: Short press (Click) and longer press (Hold).

Menu Mode

In Menu Mode, the BW RigRat provides access to start calibration, enable/disable sensors, and
enter Mesh Network Assistant.
This mode can only be accessed with the instrument turned on and then holding the button
down through the 3-2-1 countdown, followed by a second 3-2-1 countdown.
Entering Menu Mode
1. With the BW RigRat on, hold the button down through the 3-2-1 countdown, followed by a
second 3-2-1 countdown.
2. The password screen appears, release the key.
3. Enter the 4-digit password (the default password is 0000).
Step from one position in the four-character string to the other by holding the
l
button down.
Press the button repeatedly to select a desired number. Numbers increase from 0
l
to 9.
Once 9 is reached, pressing again "wraps" around back to 0.
l
4. When you are done, hold down the button. If you input the correct password, you receive
access.
BW RigRat

Modes of Operation

69 User Manual