Function Description - Fayat Group DYNAPAC CC1300 Translation Of Original Instruction Manual

Table of Contents

Advertisement

No
No
Designation
Designation
1.
1.
Starter switch
Starter switch
2.
2.
Throttle control
Throttle control
3.
3.
Emergency stop
Emergency stop
4.
4.
Vibration On/Off. Switch
Vibration On/Off. Switch
5.
5.
Handbook compartment
Handbook compartment
6.
6.
Forward/Reverse lever
Forward/Reverse lever
7.
7.
Seat switch
Seat switch
8.
8.
Fuse box (on control column)
Fuse box (on control column)
9.
9.
Instrument cover
Instrument cover
12.
12.
Sprinkler, switch
Sprinkler, switch
13.
13.
Sprinkler timer
Sprinkler timer
2021-12-14

Function description

Symbol
Symbol
Function
Function
Positions 1-2: Shut off position, key can be removed.
Positions 1-2: Shut off position, key can be removed.
Position 3a: All instruments and electric controls are
Position 3a: All instruments and electric controls are
supplied with power.
supplied with power.
Position 3b: Glowing. Hold the starter switch in this
Position 3b: Glowing. Hold the starter switch in this
position until the lamp goes out. The starter motor is
position until the lamp goes out. The starter motor is
activated in the next position.
activated in the next position.
Position 3c: Starter motor activation.
Position 3c: Starter motor activation.
In forward position, the engine idles.
In forward position, the engine idles.
In backward position, the engine runs at full speed.
In backward position, the engine runs at full speed.
When pressed, the emergency stop is activated. The
When pressed, the emergency stop is activated. The
engine switches off and the brakes are activated.
engine switches off and the brakes are activated.
Brace yourself for a sudden stop.
Brace yourself for a sudden stop.
Press once and release to switch vibration on. Press
Press once and release to switch vibration on. Press
again to switch the vibration off.
again to switch the vibration off.
Pull up and open the top of the compartment for
Pull up and open the top of the compartment for
access to handbooks.
access to handbooks.
The lever must be in neutral to start the diesel engine.
The lever must be in neutral to start the diesel engine.
The engine cannot be started if the forward/reverse
The engine cannot be started if the forward/reverse
lever is in any other position.
lever is in any other position.
The forward/reverse lever controls both the roller's
The forward/reverse lever controls both the roller's
driving direction and speed. The roller moves forward
driving direction and speed. The roller moves forward
when the lever is moved forward, etc.
when the lever is moved forward, etc.
The speed of the roller is regulated in proportion to
The speed of the roller is regulated in proportion to
how far the lever is moved from neutral. The further
how far the lever is moved from neutral. The further
the lever is from neutral, the higher the speed.
the lever is from neutral, the higher the speed.
Remain seated at all times when operating the roller. If
Remain seated at all times when operating the roller. If
the operator stands up during operation, a buzzer
the operator stands up during operation, a buzzer
sounds. After 4 seconds the brakes are activated and
sounds. After 4 seconds the brakes are activated and
the engine stops.
the engine stops.
Contains fuses for the electrical system. See under the
Contains fuses for the electrical system. See under the
header "Electrical system" for functional descriptions of
header "Electrical system" for functional descriptions of
the fuses.
the fuses.
Lowered over the instrument plate to protect the
Lowered over the instrument plate to protect the
instruments from the weather and sabotage. Lockable
instruments from the weather and sabotage. Lockable
Upper position = switching on of flow of water to drum.
Upper position = switching on of flow of water to drum.
Intermediate position = Sprinkling switched off
Intermediate position = Sprinkling switched off
Lower position = switching on of water to drum via
Lower position = switching on of water to drum via
forward/reverse lever. The flow of water can be
forward/reverse lever. The flow of water can be
controlled by means of the sprinkler timer (13).
controlled by means of the sprinkler timer (13).
Variable adjustment of water flow from 0-100%. Only
Variable adjustment of water flow from 0-100%. Only
works when AUTO (12) is pressed in.
works when AUTO (12) is pressed in.
4812162001_D.pdf
Machine description
33

Advertisement

Table of Contents
loading

Table of Contents