Replacing The Memory Expansion Slot Cover - Compaq Armada 7800 6266 T 5000 D M 1 Maintenance And Service Manual

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Replacing the Memory Expansion
Slot Cover
1. Reset the memory insulator
ensuring that all edges of the memory insulator are tucked inside the memory
expansion compartment (Figure 5-29).
2. Replace the memory expansion slot cover
expansion compartment, then sliding it left until it is seated.
3. Secure the memory expansion slot cover to the computer with a memory expansion
slot cover security screw
Figure 5-29. Replacing the Memory Expansion Slot Cover
5-32 Removal and Replacement Procedures
1 over the installed memory expansion board(s),
2 by placing it flush over the memory
3 or a standard Torx T-10 screw.