G3 Series PROFIBUS-DP
The G3 Manifold object can be opened to display the configuration
The 219-828 Valve Driver object is opened to display the module properties
The diagnostic address configured here
is used in the PLC program to access
the G3 Manifold diagnostic information
TDG3PTTM1-11EN
07/2020
Subject to change without notice
www.asco.com
TM
Technical Manual
Diagnostics must be
enabled
The example shows that none of the
available 32 bits of diagnostic data
are masked for this module (0 =
masked)
13-122