12.2
Sub-Bus Hub Module
The G3 HUB module allows for branch distribution from the I/O side of the G3 System and can be integrated into the
existing G3 Series Sub-Bus configuration. Auto Addressing allows for trouble free set up and configuration. Input,
Output, as well as Valve manifolds can be attached to the available four Branches on a HUB module. Each G3
System can support up to two HUB modules, allowing for maximum flexibility. The HUB module is transparent to the
I/O side of the G3 and does not reserve one of the potential sixteen positions.
Module
Module Type
Part No.
240-326
G3 Series PROFIBUS-DP
Diagnostics
HUB
Sub-Bus Short Circuit
TDG3PTTM1-11EN
Subject to change without notice
Technical Manual
TM
Input Size / Output Size
0 / 0 – See Note
07/2020
www.asco.com
Branches
4
11-104