Table of Contents
Advertisement
Conditions for use of this product
(1) Aventics G3 Manifold ("the PRODUCT") shall be used in conditions;
i) Where any problem, fault or failure occurring in the PRODUCT, if any, shall not lead to any major or serious
accident.
ii) Where the backup and fail-safe function are systematically or automatically provided outside of the PRODUCT for
the case of any problem, fault or failure occurring in the PRODUCT.
(2) The PRODUCT has been designed and manufactured for the purpose of being used in general industries.
ASCO L.P. shall have no responsibility or liability including but not limited to any and all responsibility or liability based on
contract, warranty, tort, product liability for any injury or death to persons, loss or damage to property caused by the product
that are operated or used in application not intended or excluded by instructions, precautions or warnings contained in Aventics
Technical, User, Instruction, Safety manuals or bulletins.
Safety precautions
Before using this product, please read this manual and the relevant manuals carefully and pay attention to safety and product
application. The following symbols are used in the manual to identify important safety, installation and application information.
CAUTION
Caution symbol indicates a possible hazard which may cause injury or equipment damage.
NOTE!
Note symbol indicates important information regarding equipment installation and setup
G3 Series PROFIBUS-DP
TDG3PTTM1-11EN
Subject to change without notice
www.asco.com
Technical Manual
TM
07/2020
2-2
Advertisement
Table of Contents
