Table of Contents
Advertisement
6. ARM – Auto Recovery Module
The Auto Recovery Module (ARM) is an optional memory module that is installed between the node and the valve
adapter module and is used to preserve the manifold system parameters even during catastrophic failure. During
the power-up process it reads the configuration of the manifold, including any user settable parameters of I/O
modules, and stores the information in its non-volatile memory. Once the information is stored, it automatically
disconnects itself from the power circuits while still mechanically attached to the manifold.
G3 Series PROFIBUS-DP
ARM Module (Legacy)
Description
ARM Module (Legacy)
ARM-Clip Module
TDG3PTTM1-11EN
Subject to change without notice
www.asco.com
Technical Manual
TM
ARM-Clip Module
Replacement Part Number
240-182
240-383
07/2020
6-41
Advertisement
Table of Contents
