9.9
501 Series, up to 128 solenoid coils
501 series, 8 station manifold with integrated 32 coil valve driver, auxiliary power connector and mid-
station supply and exhaust ports
To be used with 501 series valves on valve manifold assemblies with 33-128 coils.
•
•
Up to 3 of these valve drivers can be used on each assembly
Required to use on manifold assemblies larger than 64 coils, this manifold block has an M12 power connector
•
to supplement the main power connection on the G3 node and two additional port 1 supply and port 3/5
exhaust ports.
Aux power is required to be connected to the aux power connector provided on the extended coil valve driver.
•
Mid-Station Supply/Exhaust
Byte X
X+1
G3 Series PROFIBUS-DP
Integrated 32 coil
valve driver
X+2
X+3
X+4
X+5
X+6
TDG3PTTM1-11EN
Subject to change without notice
www.asco.com
Technical Manual
TM
Integrated 32 coil
valve driver
Pin #1 = No Connection
1
2
Pin #2 = No Connection
Pin #3 = 0 VDC
3
4
Pin #4 = +24 VDC
X+7
X+8
X+9
X+10
X+11
07/2020
Auxiliary Power
X+12
X+13
X+14
X+15
9-79