5.10
Factory Defaults
FACTORY
DEFAULTS
SET DEFAULTS
Y
N
G3 Series PROFIBUS-DP
FACTORY DEFAULT SETTINGS
Description
Node Address
Profibus mode
SSA Lock
Brightness
TDG3PTTM1-11EN
Subject to change without notice
www.asco.com
Technical Manual
TM
Factory Default Settings
Press the SET button to enter the FACTORY DEFAULTS
1.
Sub-Menu.
2.
Press the NEXT button to select Yes or No.
a.
Selecting No will bring you back to the main
FACTORY DEFAULTS menu.
b.
Selecting Yes will cause the node to reset and
return all parameters to the factory default
conditions.
Press the SET button to confirm your choice.
Default
126
DP-V0
Disabled
High
07/2020
5-36