580 Sub-Bus Valve Module
•
COMM - 5 pin M12 male Sub-Bus communication connector.
Must be connected to the SUB-BUS OUT connector of the previous assembly
o
Carries 24 VDC power for electronics of module
o
POWER - 4 pin M12 male power connector.
•
Power is required for Outputs
o
Used to distribute Valves on the Sub-Bus.
•
Does not allow connection to G3 I/O modules.
o
Sub-Bus Valve Module without I/O
G3 Series PROFIBUS-DP
Description
TDG3PTTM1-11EN
Subject to change without notice
www.asco.com
Technical Manual
TM
Part Number
P580AEDS4010A00
07/2020
7-48