Table of Contents
Advertisement
Create new Profibus device and identify in DeltaV/AMS
Add the Aventics G3 Profibus Module as a "New Profibus Device" under the control network I/O
Enable the new Profibus device and configure the Profibus address of the new device
Download the device configuration
Run identify "Profibus Device" to connect with the G3 Profibus manifold.
1 - Add New PROFIBUS Device under the associated
master port.
G3 Series PROFIBUS-DP
TDG3PTTM1-11EN
Subject to change without notice
www.asco.com
TM
Technical Manual
4 -After downloading the configuration
run "Identify PROFIBUS Device"
3 - Download the device configuration
2 - Enable the new Profibus device and
configure the G3 Profibus address
07/2020
13-129
Advertisement
Table of Contents
