G3 Series PROFIBUS-DP
Sub-Bus Valve Module
COMM - 5 pin M12 male Sub-Bus input communication connector.
•
Must be connected to the Sub-Bus Out connector of the previous assembly
o
Carries 24 VDC power for electronics of module
o
•
POWER - 4 pin MINI male power connector.
Power is required for Outputs
o
Used to distribute Valves on the Sub-Bus.
•
Can accept discrete I/O module to allow a Sub-Bus Valve manifold with I/O
o
Description
Sub-Bus Valve Module
NOTE!
There is a 0.8 VDC drop in power across this module. Please consider this if
•
distributing the Aux. Power after this module.
TDG3PTTM1-11EN
Subject to change without notice
www.asco.com
Technical Manual
TM
Part Number
240-241
07/2020
7-47