Table of Contents
Advertisement
5.5
Profibus Mode
PROFIBUS MODE
DPV0
PROFIBUS MODE
DPV1
ACCEPT
DPV1
Y
N
SAVE SETTINGS
NOW
LATER
G3 Series PROFIBUS-DP
Profibus Mode Settings
Press the SET button to highlight mode DPV0
1.
Press the NEXT button to scroll the choices for the desired
2.
profibus mode
Press the SET button to confirm your choice.
Press the NEXT button to select Yes or No to accept the
3.
setting
Press the SET button to confirm your choice
4.
Press the NEXT button to select either NOW or LATER.
Press the SET button to confirm your choice.
TDG3PTTM1-11EN
Subject to change without notice
www.asco.com
Technical Manual
TM
a.
DPV0
b.
DPV1
c.
RETURN
a.
Selecting No will bring you back to the main
Profibus Mode menu.
b.
Selecting Yes will take you to the following
menu.
SETTINGS
Saved Setting Steps
a.
Selecting NOW will cause the node to reset and
apply the new setting.
b.
Selecting LATER will cause the setting to be saved
in temporary memory to allow you to make
additional parameter changes before the node is
reset. However, you must ACCEPT the saved
changes before your next power cycle otherwise
they will be lost.
07/2020
SAVE
5-31
Advertisement
Table of Contents
