Table of Contents
Advertisement
RTD Module / Sensor Type Select
Allows the sensor type for each channel to be selected, and, enable the channel selected
G3 Series PROFIBUS-DP
(Channel
Enable):
SELECT CHAN
CHANNEL 0
SELECT CHAN
CHANNEL 0
SELECT CHAN
CHANNEL 0
SENSOR TYPE
CHANNEL 2
SENSOR TYPE
PT100 385
SENSOR TYPE
PT100 385
Y
N
TDG3PTTM1-11EN
Subject to change without notice
www.asco.com
Technical Manual
TM
A)
Press the SET button to enter the
Sensor Type Select sub menu.
Press the NEXT button to scroll
B)
through the channels.
C)
Press the SET button to select the
desired channel.
If "DISABLED" is the
first selection, the channel is not
enabled. Select a sensor type to
enable the channel.
D) Press the NEXT button to scroll
through the available sensor types.
E)
Press the SET button to select the
desired sensor type.
F)
Press the SET button to load the
selected sensor type.
07/2020
11-97
Advertisement
Table of Contents
