Table of Contents
Advertisement
RTD Module Graphic display
RTD Module / Temperature Monitoring:
TEMP AT CH0
+30
TEMP AT CH1
+10
TEMP AT CH2
DISABLED
TEMP AT CH3
+75
CH0= +150F
CH1 = +75F
G3 Series PROFIBUS-DP
TDG3PTTM1-11EN
Subject to change without notice
www.asco.com
Technical Manual
TM
1)
Press the NEXT button to scroll through the
Temperature Monitoring display options.
Pressing the SET button while in one of the
Temperature Monitoring displays, will return
the display back to the home screen.
If "DISABLED" is the temperature
identified at any channel, advance the
display to Sensor Type Select, to choose
a sensor/Enable the channel, or press
the "SET" button to jump directly to the
selection display.
Unused channels should be left
"DISABLED".
07/2020
11-96
Advertisement
Table of Contents
