Table of Contents
Advertisement
G3 Series PROFIBUS-DP
Internal or Aux. Power Select (240-363 Only)
Analog devices connected to the 240-363 can be powered from the Aux. Power supply port (Internal Power
Disabled) or from the module backplane (Internal Power Enabled). This is selected through the "Internal Power
Menu" as shown. Channels A/B and C/D are controlled independently.
INTERNAL
POWER
CHANNELS A&B
DISABLE
CHANNELS A&B
ENABLE
CHANNELS C&D
DISABLE
CHANNELS C&D
ENABLE
Power Source
NOTE!
Press the SET button to confirm your choice
Press the SET button to confirm your choice
Current Limitation for
Module
8A (From Aux. Power
Aux Power
Conn.)
Internal
1.2A (from Backplane)
Power
TDG3PTTM1-11EN
Subject to change without notice
www.asco.com
Technical Manual
TM
Internal Power Settings
1.
Press the SET button to enter the INTERNAL POWER
menu
2.
CHANNEL A & B DISABLE
3.
Press the NEXT button to scroll through the choices
to enable or disable the feature.
a.
ENABLED (Factory Default)
b.
DISABLED
c.
RETURN (this will return you to the main
menu)
4.
CHANNEL C & D DISABLE
5.
Press the NEXT button to scroll through the choices
to enable or disable the feature.
a.
ENABLED (Factory Default)
b.
DISABLED
c.
RETURN (this will return you to the main
menu)
Current Limitation for connector
2.0A / output connector (2.0A Pin 1
to Pin 3)
.15A (Pin 1 to Pin 3)
07/2020
10-87
Advertisement
Table of Contents
