Table of Contents
Advertisement
5.8
Advanced Settings - Extended Diagnostics
ADVANCED
SETTINGS
ADVANCED MENU
SET EX. DIAG.
EXT.DIAG.TYPE
DEVICE
EXT DIAG. TYPE
DVC.ID.CHN
EXT DIAG. TYPE
ID.CHN.HF
SAVE SETTINGS
NOW
LATER
G3 Series PROFIBUS-DP
Extended Diagnostic Settings
1.
Press the SET button to enter the ADVANCED SETTINGS
menu.
2.
Press the NEXT button to scroll to the ADVANCED MENU /
SET EX. DIAG
3.
Press the SET button to enter the ADVANCED MENU / SET
EX. DIAG
4.
Press the NEXT button to scroll the choices for the desired
brightness of the LCD display for all modules on the G3
system.
Apply Changes Steps
5.
Press the NEXT button to select either NOW or LATER.
Press the SET button to confirm your choice.
TDG3PTTM1-11EN
Subject to change without notice
www.asco.com
Technical Manual
TM
a.
DEVICE
b.
DVC. ID. CHN
c.
ID. CHN.HF
d.
RETURN (this will return you to the ADVANCED
MENU / SET EX. DIAG menu)
a.
Selecting NOW will cause the node to reset and
apply the new setting.
b.
Selecting LATER will cause the new setting to be
saved in memory, you must accept the saved
changes before your next power cycle otherwise
they will be lost.
07/2020
5-34
Advertisement
Table of Contents
