Emerson Aventics G3 Series Technical Manual page 106

Hub Module / Identification:
SUB-BUS
HUB 1
Hub Module / Description:
DESCRIPTION
SUB-BUS HUB
Hub Module / Advanced Settings:
ADVANCED
SETTINGS
Brightness:
Flip Display:
G3 Series PROFIBUS-DP
BRIGHTNESS
HIGH
BRIGHTNESS
LOW
Screen Jumps to Next Parameter/Selection
FLIP DISPLAY
NORMAL
TDG3PTTM1-11EN
Subject to change without notice
www.asco.com
Technical Manual
TM
1) Identifies HUB module in G3 System.
2) Identifies Module type.
3) Allows the user to set/configure module
parameters.
Press the SET button to advance to the first
parameter/setting.
A) Press the SET button to enter the Set
Brightness sub-menu and highlight the
selection.
B) Press the NEXT button to select the
desired Brightness selection, (Low,
Medium, High).
C) Press the SET button to slect the desired
Brightness level.
D) Press the SET button to enter the Flip
Display sub-menu and highlight the
selection.
Press the NEXT button to select the desired
E)
Flip Display selection, (Normal, Flipped).
F) Press the SET button to select the desired
display orientation.
G) Press NEXT to advance to the next
parameter selection (Branch Reserve)
07/2020
11-106