Safety Information For Electrical Connection; Safety Information For Initial Start-Up; Unit Description; Printing Additional "Scan & Charge" Qr Codes - Webasto TurboConnect Quick Start Manual

– The charge station is suitable for use in areas
without access restrictions.
– Protect the charge station from direct sunlight.
The charging current may be reduced at high
temperatures, or charging may be disabled
completely. The operating temperature range is
–40 °F to +122 °F (-40 °C to +50 °C).
– The installation location of the charge station
should ensure that vehicles cannot inadvertently
collide with it. Protective measures must be
implemented if the possibility of damage cannot
be ruled out.
– Do not put the charge station into operation
if it has been damaged during installation;
replacement will be required.
– Do not touch the electronic boards during the
installation process.
3.4

Safety information for electrical connection

DANGER
– Installation and connection of the charge station
must only be carried out by a qualified electrician.
– Each charge station must be protected with its
own line circuit breaker.
– A qualified electrician must make sure that all
electrical connections are de-energized before
connecting the charge station to the power
supply.
– A qualified electrician must make sure that a
properly sized supply cable is used for the power
connection.
– Do not leave the charge station unattended with
an open cover.
– Change DIP-switch settings only with the power off.
– Register the use of the charge station with the
power supply company and or utility as required.
Webasto TurboConnect
WARNING
GROUNDING INSTRUCTIONS
The product must be connected to a grounded, metal,
permanent wiring system, or an equipment grounding
conductor must be run with the circuit conductors to the
equipment grounding terminal or lead on the product.
See chapter 7, "Installation and electrical connection"
on page 10.
3.5

Safety information for initial start-up

WARNING
– The initial start-up of the charge station must be
carried out by a qualified electrician.
– Before initial start-up, the qualified electrician
must verify that the charge station has been
connected correctly.
– Do not connect a vehicle during the initial start-
up of the charge station.
– Before starting up the charge station, check
the charging cable, charging coupling, and the
charge station for visible damage. The charge
station must not be started up if it is damaged
or if the charging cable / charging coupling is
damaged.
4

Unit description

This document describes the TurboConnect Charge Station. You
can find the exact device details on the type plate of the charge
station.
Conforms to ANSI/UL
Std. 2594 in
conjunction with
Webasto Charging
ANSI/UL Std. 2231-2
Systems Inc.
Cert. to CAN/CSA
1333 Mayflower Avenue
5019177
Std. C22.2 No. 280
Monrovia, CA 91016
Std. C22.2 No. 281.2
TurboConnect
Contains FCC ID: Z64-WL18SBMOD
Type 4 Enclosure
Contains IC ID: 451I-WL18SBMOD
Ventilation Not Required / Aucune ventilation
requise / No requiere ventilación
For use with Electric Vehicles /
Pour utilisation avec des véhicules électriques /
Para uso con vehículos eléctricos
Read owner's manual before operating /
Vous lisez le manuel de I'utilisateur avant d'utiliser /
Lea el manual de usuario antes del uso.
Use Copper or Aluminum Conductors / Utiliser des
conducteurs en aluminum ou en cuivre / Utilizar
conductores de cobre o aluminio
Customer Service Phone Nr: 888-833-2148
Serial No.: XXXXXXXXXXXXXXXXX
Material: YYYYYYYY
EC: ZZZ
4.1 Printing additional "Scan & Charge" QR codes
In the scope of delivery (SOD), you will find "Scan & Charge"
QR stickers. If the QR code used for your charge station is
no longer readable, you can generate a new copy using the
product details and the serial number of your charge station.
1. Click on the following URL to add the QR code generator
extension to your Chrome browser.
https://chrome.google.com/webstore/detail/
qr-codegenerator/afpbjjgbdimpioenaedcjgkaigggcdpp
2. In your Chrome browser, click the new icon at the top right.
3. Enter the details of your charge station in the following
format:
PROD:[Part number];SERIAL:[Serial number]
Example: PROD:5112300C;SERIAL:TURBOCON-WS123456
This information can be found on the type plate on your
charge station.
EN
Input / Output
Tension d'entrée / sortie
Alimentación / Salida
Voltage /
Voltage (c.a.)
208/240
Voltaje
V (AC)
Current /
Courant /
48
Intensidad
Amps
Freq. / Fréq. /
Frec.
60
Hz
Nr. of phases /
Nombre de
1
phases / Nr de
fases
Operating Temp
/ temperature
de
-40
fonctionnement
to
/ Temperatura
+50
de operación
[°C]
Made in Germany
Fabriqué en Allemagne
Fabricado en Alemania
YYYY-MM
9