Table of Contents
Advertisement
Maintenance 8. Recovering the HDD
(15) After rebooting, click the <OK> button in the [Windows Login] dialog.
(16) Windows starts.
NOTE
If the EPSON RC+ or the SPEL CT is not installed, the [Install the Robot Control
Software] dialog appears when the Controller is started. Make sure to install the EPSON
RC+ or the SPEL CT. If it is not installed, Windows will automatically shutdown in 30
minutes.
8.2 Configuring Windows
Disabling the Automatic Restart at System Error
(1) Double-click the <My Computer> - <Control Panel> - <System> icons.
(2) Select the [Advanced] tab in the [System Properties] dialog, and click the <Startup
(3) Uncheck the [Automatically reboot] check box in the [System Failure] group box in
(4) Another dialog appears. Click the <OK> button.
(5) Click the <OK> button in the [System Properties] dialog.
(6) Click the <No> button in the [System Settings Change] dialog.
Following items are set up by Windows recovery.
NOTE
- Change the display configurations
- Power configurations
- Setting the Network to disabled
- Disabling the Check Disk during Windows start
- Changing the Communication Port COM3 configuration
- Disabling the automatic update
188
and Recovery> button.
the [Startup and Recovery] dialog. Then, click the <OK> button.
RC520 Rev.7
Advertisement
Table of Contents
