Installation Of The System Panel - Epson RC520 Manual

(10) Remove four mounting screws on the Drive Bay Unit, and remove the Drive Bay
(11) Remove four mounting screws on the both sides of the Drive Bay Unit.
(12) Pull the System Panel forward to remove it from the Drive Bay Unit.

4.5.2 Installation of the System Panel

(1) Install a new System Panel in the Drive Bay Unit and secure it with the screws.
(2) Install the Drive Bay Unit in the Control Unit and mount it with screws.
(3) Install the FDD in the Control Unit.
(4) Connect the cables for the FDD, HDD, and CD-ROM drive.
(5) Connect the cable from the System Panel to the MIB.
(6) Mount the board holder assembly to the Control Unit.
(7) Place the Top Cover of the Control Unit back on and mount it with four screws.
RC520 Rev.7
Unit.
System Panel
Drive Bay Unit
Drive Bay Unit
Maintenance 4. Control Unit
139