Components Of Emergency Connector Plate Kit; Safety Door Switch And Emergency Stop Switch - Epson RC520 Manual

11.5.2 Components of Emergency Connector Plate Kit

The Emergency Connector Plate Kit consists of the following parts.
Emergency Connector Board
: Provides the emergency connector function of the Drive Unit for the Control Unit.
Emergency Connector Junction Cable
: Connects an emergency connector board with the MIB.
Motion Connector Cover
: Prevents the use of a MIB motion connector.
When using the Control Unit only, be sure to place this Motion Connector Cover to
avoid connecting with the Drive Unit.

11.5.3 Safety Door Switch and Emergency Stop Switch

For details about functions and connection of the Safety Door switch, Emergency Stop
switch and Latch Release switch, refer to the proper section shown below.
Setup & Operation 5.1 Safety Door Switch and Latch Release Switch
Setup & Operation 5.2 Emergency Stop Switch
RC520 Rev.7
Setup & Operation 11. Stand-alone Option for RC520
109