Technogym DGK02U0 Technical Service Manual page 90

SPEED
5 Km/h
10 Km/h
[5]: Check the resistance between the 3 phases of the belt motor:
PIN 1 - PIN 2 ~ 1.3 Ω (including the impedance of the tester):
- 90 -
DRIVE
Output
Frequency [Hz]
The value is under testing; it'll be ready
as soon as possible.
The value is under testing; it'll be ready
as soon as possible.
TECHNOGYM RUN Technical Service Guide
If the test is carried out without an-
yone walking/running on the tread
belt, the precision is around 1%.
If the test is carried out with a per-
son walking/running on the tread
belt, the precision is around 5%,
due to greater fluctuation.
Tab. 21
Fig. 48
TSG-00284-EN- Uncontrolled copy if printed
Rev. 1.0
Notes