In A Good Condition - Technogym DGK02U0 Technical Service Manual

TECHNOGYM RUN Technical Service Guide
Rev. 1.0
6.1.4.2 PROCEDURE TO FOLLOW IF THE BELTS ARE WORN BUT THE
SLATS ARE IN A GOOD CONDITION
Necessary components:
Plates (to be positioned between the slats
and the self-locking nuts)
Strips of rubber (to be positioned between
ISOFLEX Topas L32 (45g)
The following components are required:
Support for the equipment in a lateral po-
Number of technicians required:
2: If equipped with the accessory that blocks the equipment, when it is in a vertical
position.
3: If not equipped with the accessory that blocks the equipment, when it is in a verti-
cal position. The additional technician must keep the equipment stable when it is in
a vertical position.
Required space: 3-4 m
TSG-00284-EN- Uncontrolled copy if printed
COMPONENT
Self-locking nuts
the belt and slats)
Belts
COMPONENT
Machine lifting foot
M16 nut
sition
M10 L75 screw
2
Q.TY
130
250
14
2
1
Q.TY
2
4
1
1
- 59 -