Technogym DGK02U0 Technical Service Manual page 46

Arrange the excess cable length along the side or in front of the product using the cable entries
provided with the product.
WARNING: The wall socket must be located in a place where the device may be easily
and safely plugged in and unplugged. The power switch must be in 0 position (OFF) before
plugging in the product. Check the state of the power cable periodically.
The product must be grounded. In the event of faulty operation or failures, the earth wire provides
the electrical current a low resistance path, reducing the risk of electrical shocks. The product in-
cludes a cable with earthing conductor and plug. The plug must be inserted in a properly installed
socket connected to the earth in accordance with local codes and regulations.
WARNING: Improper connection of the earthing conductor can result in the risk of an elec-
tric shock. The customer must check with a qualified electrician or maintenance technician
if he's in doubt whether the product is properly grounded. The customer must not modify the
plug provided with the product; if it does not fit the socket, have a proper socket installed by
a qualified electrician.
- 46 -
TECHNOGYM RUN Technical Service Guide
Fig. 20
TSG-00284-EN - Uncontrolled copy if printed
Rev. 1.0