3.9 THE DISPLAY (HIGH KIT)
The High Kit (HK):
•
receives the power supply from the STIWI drive;
•
communicates the set training profiles to the drive;
•
receives information from the drive relative to the absence of the user on the equipment;
•
communicates with the Low Kit via a protocol based on the physical layer RS-485 Half
Duplex, 115.2 KBoud;
•
is connected and receives information from the stop button and from the emergency de-
vice.
3.9.1 TECHNOGYM LIVE 27"
The numbers/letters shown in the figures correspond to the following components/connectors:
1: Main Power;
2: NFC/GYMKIT device;
3: WiFi module;
4: Headphones jack, signal for ON/OFF button and Stand-By led;
- 36 -
TECHNOGYM RUN Technical Service Guide
Fig. 12
TSG-00284-EN- Uncontrolled copy if printed
Rev. 1.0