Changing Rights Associated With Locations; Why Change Rights - SMC Networks ELITECONNECT SMC2502W User Manual

Note:
Any system connected through one of the WLAN Access Manager's ports can access the
web interface through the 42.0.0.1 IP address for initial system configuration.
Step 4.
Click Goto Rights Manager.
The Rights Manager screen appears, as shown in
The Home screen for the Rights Manager shows each user and its MAC address,
the Where, which is the WLAN Access Manager or the WLAN Access Manager
plus its port, the client IP Address, and the date and time that the client's rights
expire.
6.4

Changing Rights Associated with Locations

A Location is a group of Wheres, and some set of rights associated with the
location itself. A Where is a WLAN Access Manager or a WLAN Access Manager
port or a specific client. Locations are also associated with Whens, the times that
the location is available to groups of clients. See
is Valid for more information on changing the times associated with a group.
6.4.1

Why Change Rights

You must configure the initial rights that are associated with a location to enable
the SMC WLAN Secure Server. After configuring initial rights, you might need to
add locations, modify the rights associated with a location, or delete locations
because the locations or the functions housed in the location might change.
6-6
Figure 6-5. Home Rights Manager
Figure 6-5.
Changing the Time that a Group
Configuring the Rights Manager