For more detailed information on adding advanced allows or redirects, see the
tcpdump manual page.
6.8.2
Modifying a Rights-Allow
To modify an existing rights-allow:
Step 1.
To change an allow for a particular group, check or uncheck the box
corresponding to that allow-group intersection in the Groups Manager, as
shown in
Step 2.
To modify the Protocol, Port, and Address, click the Allow in the Groups
Manager, and change these parameters in the Allow Editor, as shown in
Figure 6-58 on page
6.8.3
Deleting a Rights-Allow
To delete a rights-allow:
Step 1.
In the Groups Manager, click the allow you want to delete. The Allow
Editor, as shown in
Allow Delete Confirmation screen appears, as shown in
EliteConnect WLAN Security System User Manual
Figure 6-61. Filter Screen
Figure 6-57 on page
6-50. Then click Update.
6-51. Then click Add.
Figure 6-58 on page 6-51
appears. Click Delete. The
Figure
6-62.
6-53