To use the Built-in Authentication service:
Step 1.
Click the Built-in checkbox on the Authentication screen, as shown in
Figure 6-49 on page
Step 2.
Click Update.
Step 3.
If you configure 802.1x Logons, use the Where Editor from the Location
Editor to enable watching for 802.1x logons. If you enable 802.1x logons,
use these fields to specify the 802.1x RADIUS server:
Step 4.
Type the port number.
The default port number is 1812.
Step 5.
Type the RADIUS shared secret.
Step 6.
Click Update.
To use the LDAP Authentication Service:
Step 1.
From the Rights Manager Authentication screen, click LDAP.
The LDAP authentication screen appears, as shown in
page
6-42
6-41.
6-42.
Figure 6-50. LDAP Authentication Screen
Figure 6-50 on
Configuring the Rights Manager