Updating The System Software - SMC Networks ELITECONNECT SMC2502W User Manual

Step 4.
Click Return to Main Menu.
After the system reboots, you can start again using the restored image.
The system might take 90 seconds to reboot.
Note:
If your system settings have become inconsistent, for example, a power failure occurred
while restoring from a backup, you can reset to factory defaults and reboot to restore the
initial system settings. However, you must reconfigure your system completely if you
restore from factory defaults. You can restore your setting from a back-up image.
4.3

Updating the System Software

Upgrading system software is a two-step process. First, download a new software
image. This new image becomes the Alternate Version. Then, reboot from the
Alternate Version, which automatically makes the older image the new alternate
version. This allows you to revert to the older images if the new image is
unsatisfactory.
Before updating system software, it is prudent to create a backup of your current system software. See
Creating and Storing a Backup
To update the system software:
Step 1.
Click Update Software from the Main Menu.
The Update Software screen appears, as shown in
Step 2.
Type the URL from which you want to download the software.
This field provides the latest version available. If you leave this blank, the
SMC EliteConnect WLAN Security System User Guide
Figure 4-9. Backup Status Restore
IMPORTANT:
Image.
Figure 4-10.
4-7