5.1
Viewing Status Information
This chapter explains how to view information about the WLAN Secure Server and
WLAN Access Manager. The screens that provide this information let you filter the
information. This enables you to easily find the WLAN Security System
information that you need.
To filter, click Apply Filter, as shown in
click Reset Filter. Depending on the screen you view, you can filter on the
following entries:
Table 5-1 Filtering Information
Entry
Lines
Protocol
MAC Address
Port number
Severity
Within
Search
5-2
Figure 5-1. View Active Sessions
Details
You can specify a number of entries to be displayed. The default is
25. You can choose 10, 25, 100, 1000, or unlimited.
Choose the protocol from the drop-down list; you can choose All, IP,
TCP, or UDP.
Choose the MAC address from the drop-down list; you can choose
All or one of the MAC addresses shown.
Choose All or one of the ports in the list.
Choose the error type that you want to see; choose Notice, Critical,
Informational, Warning, or Error.
Choose the time period for which you want to view logs; you can
choose the past hour, day, week, or unlimited.
Type a string that you want to find. It can be any string on which you
want to search or filter.
Figure
5-1. To restore to the default filter,
Viewing System Status