SMC Networks ELITECONNECT SMC2502W User Manual page 33

Figure 2-6. Advanced Network Configuration for the WLAN Secure Server
Step 2.
Enable Ethernet Bridging, if appropriate for this WLAN Secure Server or
WLAN Access Manager. A WLAN Security System is a Layer 3 device
that provides filtering and redirection of IP packets at Layer 3. With
bridging, you can specify certain Layer 2 packets to be copied across a
WLAN Secure Server or WLAN Access Manager.
Step 3.
For Bridged traffic:
a.
b.
c.
EliteConnect WLAN Security System User Manual
Click Cisco Discovery Protocol to enable CDP packets through this
WLAN Secure Server or WLAN Access Manager.
This Layer 2 protocol is used by Cisco network hardware and
software to manage a network of Cisco devices.
Click Wireless Network Access Protocol to enable WNMP packets
through this WLAN Secure Server or WLAN Access Manager.
This Layer 2 protocol is used by Symbol Technologies, Inc. network
hardware to manage a network of Symbol devices.
Click Enable IP Multicast.
This enables multicast packets to be copied from the Network Uplink
subnet to all clients connected to ports on this WLAN Secure Server
or WLAN Access Manager.
2-7